What's new in ezRushes — the app on your remote and the review portal. ezRushes is in beta; updates ship continuously.
0.5.64
· Sep 2026
Screen recordings of FPV flights from DJI Fly now upload right after you stop the recording instead of about two minutes later. Background: ezRushes waited for ezBTS to rename the clip after DJI’s clip code — but that code only exists on DJI Pilot 2 remotes, so on a DJI Fly remote it waited for something that could never arrive. It now waits only where a rename is actually possible, notices finished ezBTS recordings immediately instead of on the next scan, and never uploads the same recording twice if it is renamed later. Works best together with ezBTS 1.3.18, which gives such clips their final name straight away.
0.5.63
· Sep 2026
Clips remember the project and folder they were recorded for. If you record without a connection and switch to another project before the remote is back online, every clip still uploads into the project it belongs to. The queue shows “→ project” next to a clip whose target differs from your current selection — tap it to move that clip (or all of them) to the current project. The wrap check now checks each project separately. New: the app warns you when your portal storage is over your plan and uploads are running on the safety buffer. Also fixed: the selected upload folder could silently reset to the project root on older pairings, and a rare case where the app kept asking for screen capture: after granting it, metadata capture switched itself off again seconds later and the “metadata” pill kept coming back over DJI Pilot 2 — on remotes with ezBTS this also left ezBTS unable to record. ezRushes now notices within about a minute when ezBTS has screen capture again and hands its own back (please update ezBTS to 1.3.17 as well).
0.5.62
· Sep 2026
The status pill setting is now a simple switch, and the ezRushes pill has the same size and look as the ezBTS pill, so the two sit neatly together over the DJI app.
0.5.61
· Sep 2026
Tidier app: all permissions in one place with a clear status, Upload mode now has an “Off” setting (replaces “Pause uploads”), and the client QR code and HDMI preview code live in their own “Client preview” section. On a pilot’s remote you can choose to upload only ezBTS clips. Fixes the ezBTS status pill disappearing — and ezBTS not starting its recordings — while the ezRushes pill or the HDMI preview code was on screen (please update ezBTS to 1.3.16 as well). Camera metadata is no longer skipped when the status pill sits on the DJI camera bars, and the HDMI “Preview rushes” code has evenly rounded corners.
0.5.60
· Sep 2026
Redesigned status pill: always there over DJI Fly and DJI Pilot 2, showing “ezRushes” with a status symbol — green arrows while uploading, a green dot when all is done, a red square when paused or offline, an exclamation mark if something needs attention. Tap it for details such as the error, queued clips or today’s uploads. The client QR code now opens full screen and fits small remotes like the RC Pro; tap anywhere to close, long-press the QR button to share the link instead. New option: show a small “Preview rushes” QR code in the corner of a monitor connected via HDMI.
0.5.59
· Sep 2026
“Delete ezBTS clips on the remote after upload” now really frees up storage: a clip is only removed once your portal confirms the complete, full-size copy — nothing is deleted in LQ mode. Needs ezBTS 1.3.15 or newer. Uploads now only count as done when the server confirms the full file.
0.5.58
· Sep 2026
The status pill shows READY when idle and only appears while DJI Fly or DJI Pilot 2 is in front.
0.5.57
· Sep 2026
Upload status pill over the DJI app (off, during uploads or always). Pause uploads in the settings or right from the notification; uploads wait automatically for network and battery. Tap a queued clip to upload it next. New wrap check: see at a glance whether all of today’s clips are on the server. Renaming a project in the portal no longer interrupts uploads, and the app warns when the remote runs low on storage.
0.5.52–56
· Sep 2026
Metadata capture comes back by itself after a reboot — with or without ezBTS on the remote — and no longer interrupts ezBTS recordings.
0.5.48–51
· Sep 2026
More reliable camera metadata: the pilot’s remote (FPV view without camera values) is recognised automatically, so no wrong values are attached, and clips uploaded later no longer pick up the current camera settings.
0.5.47
· Sep 2026
Clip preview got real player controls — play/pause, a scrub bar and a time display, sized to fit every remote screen.
0.5.45
· Sep 2026
Dialog actions (Create / Cancel / Save) moved into the title row, so the on-screen keyboard can never cover them.
0.5.43–44
· Aug 2026
New METADATA status pill over the DJI app on every remote: if metadata capture is off (e.g. after a reboot), one tap re-enables it — no need to open the app.
0.5.41
· Aug 2026
BTS screen recordings now upload much sooner after each take.
0.5.39–40
· Aug 2026
Bullet-proof updates: interrupted downloads resume automatically and update verification works on all supported remotes. Inspire remote stays locked to landscape.
0.5.36–37
· Aug 2026
Camera metadata got more reliable: values are sampled repeatedly during recording, implausible readings are cleaned up, and EV 0.0 is no longer missed.
0.5.30+
· Aug 2026
Mavic 4 Pro / DJI RC Pro 2 support — including portrait mode with an automatic “portrait” tag on vertical clips.
The app updates itself: it checks on launch and installs new versions with one tap.
Currently live: v0.9.2-beta — the portal updates for everyone at once, there is nothing to install.
0.9.2
· Sep 2026
The fullscreen button in the player now works reliably on phones. It was a 22-pixel target squeezed against the screen edge — the control row overflowed on narrow screens, so the right part of the button was cut off and not tappable at all, and a tap often hit the 709 button or the video instead. All player buttons are now proper thumb-sized targets, the row fits every phone, the first tap after the controls fade out only brings them back instead of pausing, the button switches to an “exit” icon while you are in fullscreen, and iPhones now get real fullscreen video where possible instead of only the rotated preview.
0.9.1
· Sep 2026
No more hard stop in the middle of a shoot: beyond your plan’s storage, uploads continue on a safety buffer (5 GB, 3 GB on Free). As soon as the buffer is in use you are warned in the admin portal, in the app on the remote and by email — and again if the buffer runs out. Clips that no longer fit stay queued on the remote and upload automatically once there is space.
0.9.0
· Sep 2026
Your brand, your portal: choose dark, light or system mode and your own brand colour (or one of five palettes) under Admin → Settings → Appearance. Buttons, links, icons and highlights follow it in your admin area and on every client link, and text contrast stays readable automatically. White logos get a dark backing in light mode.
0.8.2
· Sep 2026
Tile view for clips — now the default in the admin and client view. Clip name and metadata appear when you hover over a thumbnail, the actions stay below each tile, and comments open right inside the tile. Switch back to the list any time.
0.8.1
· Sep 2026
Upload notifications by email: add recipients per project and get one summary per upload session with a direct link into the project.
0.8.0
· Sep 2026
Try Pro for 14 days when you activate the free plan. The admin dashboard now shows how much storage you use.
0.7.4
· Sep 2026
“Stay signed in on this device” for the admin area, the client PIN and your account.
0.7.3
· Sep 2026
Camera metadata and metadata filters can be switched off (Admin → Settings). Connected devices show which app version each remote runs.
0.7.2
· Sep 2026
Player: faster start, fullscreen always switches to landscape on phones, and the controls stay visible until playback starts.
0.7.1
· Sep 2026
Behind the scenes: daily backups, protection against password guessing on all logins, and every upload is checked for completeness on the server.
0.7.0
· Sep 2026
Referral program: invite another crew — they start with +1 GB, and you permanently gain +1 GB and +1 project slot per invite (up to three). Your link lives on your account page and in the admin dashboard.
0.6.1
· Sep 2026
Design refresh across the portal: clearer typography, calmer layout, faster scanning — same workflow.
0.6.0
· Sep 2026
Guided tour for new admins (“Tutorial” in the menu) and a configurable client disclaimer (Admin → Settings).
0.5.0
· Aug 2026
Rec.709 preview for D-Log clips — one click in the player, no re-render, no re-upload.
0.4.0
· Aug 2026
Notes per clip (shown to your client when filled) and a full metadata editor.
0.3.0
· Aug 2026
Auto-retention: projects can clean up old clips automatically — clips your client marked as Select can be kept.
0.2.0
· Aug 2026
QR quick access from the remote straight into the client view, and hide/show without a page reload.
0.1.0
· Aug 2026
Playback polish: instant scrubbing on long clips and fullscreen that works on phones.